How to clean and maintain outdoor furniture?

How to clean and maintain outdoor furniture?

Clean cloth
When cleaning and maintaining external furniture, it is important to first ensure that the cloth used is clean. After cleaning or wiping away dust, be sure to flip it over or replace it with a clean cloth before use. Don’t be lazy and repeatedly use the dirty side, as this will only cause the dirt to rub against the surface of the furniture repeatedly, and instead damage the shiny surface of the outer furniture.

Choose the right nursing agent
To maintain the original brightness of exterior furniture, there are currently two types of furniture maintenance products: exterior furniture care spray wax and cleaning and maintenance agents. The former mainly targets furniture made of various materials such as wood, polyester, paint, fireproof plywood, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for furniture made of various materials such as wood, glass, synthetic wood, or plywood, especially for exterior furniture made of mixed materials. Therefore, if you can use skincare products that have both cleaning and care effects, you can save a lot of valuable time.
Before using the care spray wax and cleaning and maintenance agent, it is best to shake them well first, and then hold the spray can straight at a 45 degree angle, so that the liquid components in the tank can be completely released without losing pressure. Afterwards, gently spray the dry cloth at a distance of about 15 centimeters, and then wipe the furniture to achieve a good cleaning and maintenance effect.
In addition, remember to wash and dry the cloth after use. After special waterproof, sunscreen, and anti-corrosion technology treatment, regular cleaning and maintenance are very simple:
Aluminum alloy: If there are stains on the surface, please wipe with clean water and do not use concentrated acid or alkaline cleaning agents.

Teslin cloth: Use a cloth dipped in clean water to scrub.

Wooden tables and chairs: Use a cloth to wipe, do not scratch with hard objects to avoid damaging the waterproof layer on the surface.
PE rattan: PE rattan furniture can be cleaned with a soft brush, cloth, or vacuum cleaner, and should be protected from collisions and scratches from sharp edges or hard objects. PE rattan can prevent moisture, aging, insects, and infrared radiation, so there is no need to put too much effort into maintenance.
Plastic parts: can be washed with ordinary detergent, be careful not to touch hard objects, and do not use metal brushes for washing. It should be prevented from collision and scratching by sharp edges or hard objects. If there are cracks, they can be repaired by hot melt method.
Metal parts: Avoid bumping and scratching the surface protective layer during transportation; Do not stand on folding furniture to avoid deformation of the folding parts and affecting its use. Just use warm soapy water to scrub, do not use strong acid or alkaline cleaning agents to clean, so as not to damage the surface protective layer and rust.

Weaving rattan outdoor furniture sofa
maintenance
(1) During daily maintenance
Use a clean soft cloth to regularly wipe the paint surface, and do not let furniture come into contact with acidic, alkaline chemicals and oils.
(2) Burn mark
Cigarette butts or unextinguished matches leave burnt marks on the paint surface of furniture. If the paint surface burns, wrap a layer of fine textured hard cloth around the matchstick or toothpick, gently wipe the marks, and then apply a thin layer of wax to fade the burnt marks.
(3) Scald mark
If white burn marks are accidentally left on the paint surface of furniture, they can usually be wiped with a cloth dampened with alcohol, floral water, kerosene, or tea. If it cannot be removed, it is best to repaint the surface.
(4) Scratches
If the paint surface of the furniture is scratched and does not touch the wood under the paint, it can be painted on the wound surface of the furniture with crayons or pigments of the same color as the furniture to cover the exposed background color, and then a thin layer of transparent nail polish can be applied.
(5) Water stain mark
You can cover the mark with a damp cloth, and then carefully press the damp cloth several times with an electric iron to fade the mark.
The maintenance methods may vary depending on the material:
Aluminum alloy spray coating: If there are stains on the surface, they can be wiped with clean water, and do not use heavy acidic or alkaline cleaning agents. Wooden tables and chairs: Do not scrub with hard objects to avoid damaging the waterproof layer on the surface. Tesla cloth: Just use a cloth to scrub with clean water. PVC Vine: Vine furniture can be cleaned with a brush, cloth, or vacuum cleaner. It should be resistant to step collisions and scratches from sharp objects, and can also be moisture-proof, anti-aging, insect resistant, and infrared resistant. Therefore, there is no need to worry about care.
Plastic parts: Generally, they are relatively light and resistant to acid, alkali, corrosion, and have good insulation and thermal insulation properties. However, their hardness is poor, and they should be prevented from collision and scratching by ancient objects on the cutting edge. If listed, they can be repaired by hot melt method, and there is no glue to stick them. Can be washed with regular detergent, be careful not to touch hard objects, and do not use a metal brush for washing.
Metal parts: When handling metal, avoid bumping and scratching the surface protective layer; Do not stand on folding furniture to avoid deformation of the folding parts and affecting its use. Just occasionally scrub with warm soapy water, do not use acidic or alkaline cleaning agents to avoid damaging the surface paint layer and rusting it.
Tempered glass: Do not use sharp objects to strike or impact the edges and corners of the glass; Do not wipe the glass surface with corrosive liquids; Do not use rough materials to wipe the surface of the glass to avoid damaging it